Joining of dense Si3N4 ceramics with tape cast Lu-Al-Si-O-N interlayer

Lu-Al-Si-O-N tapes with different thickness were used to join gas pressure sintered Si₃N₄ ceramics. The microstructure of the joints and the influences of the joint thickness and joining temperature on the bonding strength of the as-joined Si₃N₄ ceramics have been investigated. The highest bonding strength about ~ 300 MPa of the joined specimens was achieved by using 450 µm interlayer at 1450 °C. The existence of Si₃N₄ nanowires was beneficial for the improvement of the bonding strength by interweaving the oxynitride glass matrix in the joint region.     

Anderson Acceleration for Nonconvex ADMM Based on Douglas-Rachford Splitting

The alternating direction multiplier method (ADMM) is widely used in computer graphics for solving optimization problems that can be nonsmooth and nonconvex. It converges quickly to an approximate solution, but can take a long time to converge to a solution of high-accuracy. Previously, Anderson acceleration has been applied to ADMM, by treating it as a fixed-point iteration for the concatenation of the dual variables and a subset of the primal variables. In this paper, we note that the equivalence between ADMM and Douglas-Rachford splitting reveals that ADMM is in fact a fixed-point iteration in a lower-dimensional space. By applying Anderson acceleration to such lower-dimensional fixed-point iteration, we obtain a more effective approach for accelerating ADMM. We analyze the convergence of the proposed acceleration method on nonconvex problems, and verify its effectiveness on a variety of computer graphics including geometry processing and physical simulation.     

一种面向网络连通性的关键网络元素脆弱性分析方法

准确评估网络系统脆弱性对于网络安全规划和风险管理至关重要.现有网络脆弱性分析方法大多利用单一特性识别脆弱元素,随着网络系统复杂化进程加快,多元化的脆弱性识别显得尤为重要.从攻击者的角度出发,提出一种面向网络连通性的关键元素脆弱性分析方法,识别网络中具有多重重要身份且破坏代价小的网络元素,利用局部分析措施确定网络关键元素并将网络连通性作为脆弱性衡量指标,以识别出关键元素中可致使网络连通性特定降级的最小代价集合.仿真结果表明,所提出方案对脆弱元素的定位更加准确,可为网络安全防护措施的制定提供有效且可靠的参考.     

基于状态评估的智能配电网态势感知方法研究

针对传统智能配电网态势感知方法缺少对特征向量的一致性检测，导致评估结果不准确的问题，提出基于状态评估的智能配电网态势感知方法。构建智能配电网模型，利用最小二乘拟合法剔除智能配电网计量异常数据，建立评价指标体系，引入层次分析法计算权重。利用所得权重两两比较建立矩阵，确定特征向量，基于状态评估检测矩阵的一致性，提取特征向量矩阵最大值，实现智能配电网的态势感知。实验结果表明，基于状态评估的智能配电网态势感知方法的评估结果与实际结果吻合度极高，能够真实还原智能配电网态势。     

基于正交试验的非对称垂直轴水轮机数值模拟

运用正交试验法开展了具有非对称NACA翼型的垂直轴潮流能水轮机的非定常数值模拟研究,分析弯度、弯度位置、前缘半径、最大厚度位置对叶轮能量提取率的影响。使用极差分析法确定了各因素影响的主次顺序和各尖速比下由最优参数确定的翼型。结果表明:在不同尖速比下,弯度是影响水轮机性能的主导因素,对水轮机能量提取率的贡献率分别为44.7%(尖速比λ=2.25)、53.4%(尖速比λ=2.5)和59.4%(尖速比λ=2.75);次要因素为最大厚度所在位置,其余两个参数对其性能影响较小。针对最优参数确定的翼型进行验证,结果证实具有该翼型的水轮机的动力学性能要好于其他翼型。     

一个北方乡村寺庙的千年自传(下):平顺龙门寺石刻文辑录(17~20世纪)

山西平顺龙门寺留有大量五代至民国的石碑、塔幢、题记,学界至今未有完备的整理及录文发表。笔者经多次实地踏查及文献搜集,整理、辑录了66篇(处)记文,是迄今对龙门寺文字史料最为完整的辑录。本篇为明崇祯、清、民国时期的部分,共计32篇。     

A multi-material part design framework in additive manufacturing

Additive manufacturing (AM) technologies provide more freedom to functional part design in various industries. One of the unique capabilities of AM is that multi-material parts can be produced with material compositional and geometric complexity. Multi-material parts have the advantage of achieving multiple performance requirements. In the research, we propose a framework for designing multi-material parts using AM processes. The proposed framework is composed of four interacting modules, including design requirement identification, primary material selection, AM process selection, material composition, and part geometry determination. Rules and guidelines for AM are integrated into the proposed framework with AM processes’ capabilities and constraints compiled in databases. We also introduce databases to assist in decision-making and ensure manufacturability of the designed multi-material part in various product design phases. The proposed framework is applied to a case study involving a conceptual design of a multi-material battery pack cooling plate.     

[可靠性建模及试验技术]重型机床液压元件油液污染退化量分布剖面可靠性建模

针对重型机床液压系统故障频繁且多与油液中的固态颗粒污染物相关的问题，进行了油液污染趋势变化试验。通过时域分析获得了油样颗粒数的有量纲和量纲一参数，通过Q-Q图和K-S检验分析有量纲参数，污染颗粒数是退化量服从正态分布的退化数据。进行了油液污染与环境相关性分析试验，采用相关系数法分析得到，颗粒数变化量与一定范围内的温度、流量、压力的相关性小；将液压元件分为管路、阀、过滤器三类，用直径5 μm左右的颗粒和直径大于15 μm的颗粒分别研究管路及阀件的堵塞和磨损情况，以过滤器过滤精度大小的颗粒研究过滤器的堵塞情况，设定ISO4406标准20/17级对应的颗粒数为阈值，利用退化量分布建立了液压元件单一故障模式的可靠性模型；利用竞争失效模型将上述模型融合为多故障模式下的可靠性模型。